12 files
-
ZModeler 3.2.0 in ZModeler
By DMN
ZModeler3 core have been upgraded to support 64-bit builds, starting from version 3.2.0 two versions will be available (32-bit and 64-bit) for download. Versions are cross-compatible in features and saved files, however you will be unable to open .z3d files created in any of these and further versions in any old version of ZModeler. It is recommended to keep backup of your .z3d files saved in current version of ZModeler if you wish to revert to older version for some reason. New 32-bit and 64-bit are not guaranteed to run and activate smoothly, so having an old version backup is worth for the first days of release.
Requirements
ZModeler3 requires additional Microsoft redistributive libraries to be installed prior running ZModeler3 on your system. Download vcredist_x86.exe (32-bit) or vcredist_x64.exe (64-bit) package from Microsoft website.
A package of 64-bit version includes 64-bit versions of standard libraries and some DirectX libraries required to run ZModeler, however it worth to install these libraries using standard installation packages (links above).
Changes log
This is generally a version upgrade for 64-bit support, however it includes some accumulated updates and bugfixes reported earlier in this forum. This version is able to load the recently updated ETS2/ATS prefabs with extended GPS navigation info in .ppd files. Also, some shader definitions were added into GTA5 import/export filter. Additionally, a mesh collision for GTA5 was remastered slightly and should produce less bugs in game (especially the case of using models in FiveM). An extended version of collision (groups) have been implemented (used in scenery objects and locations), but currently goes as undocumented feature, will provide more info on this subject later.
-
ZModeler 3.1.0 b1098 in ZModeler
By DMN
Скачать ZModeler v3.1.0 build 1098 - новая версия самого популярного и известного 3D-редактора для игровых моделей!
В третьей версии
Полностью обновлен интерфейс
Добавлено огромное количество функций
Редактирование и создании анимации
Новые средства и инструменты для моделирования
Удобная работа с иерархией модели
Возможность автоскрытия панелей инструментов
Обновленный редактор материалов
и многое-многое другое
В версии 3.1.0 b1098
GTA:V vehicle import/export filter
Materials browser changes
Paint tools color channel
Object groups
-
ZModeler 3.0.6 b103 in ZModeler
By DMN
Скачать ZModeler 3 v.3.0.6. build 103 - новая версия самого популярного и известного 3D-редактора для игровых моделей!
В третьей версии
Полностью обновлен интерфейс
Добавлено огромное количество функций
Редактирование и создании анимации
Новые средства и инструменты для моделирования
Удобная работа с иерархией модели
Возможность автоскрытия панелей инструментов
Обновленный редактор материалов
и многое-многое другое
В версии 3.0.6 b103
Splines.
Splines were restored and now available in ZModeler3. Splines and their control point have the following features (some should be configured in options):
Shared (linked) control point positions between different splines
Per-point segmentation (detalization) or automatic detalization
Three types of control points (affects incoming and outgoing spline segment): corner, bezier and bezier-corner
User-defined options can be set on spline and/or any control point
Spline and manipulators colors customization via settings menu
Per-spline color assignment can be configured in settings menu (and color is set in spline properties)
Drawing spline direction arrow can be configured in settings menu.
The following tools can deal with splines and perform specific tasks when applied to spline or spline control point:
Attach - merges joined spline into one spline when applied on nodes level (splines should have a shared point already); merges splines into single spline when applied on manipulators level (a sort of "connect" operation is performed when one point is bridged/connected to another point with new spline segment) - no shared point required to attach this way.
Break - breaks up spline at a given control point. You can break the closed (looped) spline so it will have an accessible start and end-point. When breaking non-closed spline chain, a new spline is created at break point. When splines head or end-point is merged to another spline, using a break tool on this point can detach spline, so it's no longer linked with merged point to any other spline (to say, "Detach" tool does the same).
Delete - deletes spline or spline control point
Flip - changes spline direction.
Insert - when applied on manipulators level, creates a spline point under cursor in a given spline. Spline shape is preserved.
Mirror, Move, Rotate, Scale - each tool does what it supposes to do.
Detach - can be applied to spline on nodes level. Will detach it's merged points from other splines.
Weld - merges selected control points (points from different splines can be welded to create a merged/linked control point). Welding a start and tail point of the same spline will "close" the spline into looped curve. Merging several sequential control points of the single spline will produce single control point instead of selected.
Snapping - two more buttons added to snapping toolbar: Spline Points and Spline Curves. These allow snapping to spline points and to spline curve lines.
Spline creation
Spline creation tools are on "Create" tab of commands bar in "Splines" group. Strip tool requires click-and-drag approach when click specifies position of control point and dragging specifies an outgoing curvature of segment. Spline is drawn interactively, so you can see changes during creation. An Arc tool creates a three point arc spline given a start, end and mid-points.
Each of these tools can interactive weld control points with existing splines. When you place a point close enough to existing spline point, the potential weld is highlighted with a small purple circle. Then ZModeler will ask whether you intended to weld points at given positions, or just snap them (refine positions, so they perfectly match, but do not weld). The strip tool can end spline creation then, or can continue if needed.
The Circle spline creation tool creates a circle given it's center point and a radius. The circle is aligned to viewport, so it's control points are laid with higher accuracy. When you hold Ctrl key, you can specify any initial position of control point and alternatively can create an ellipse (so two radius values are specified: Base-radius and Up-radius). An entry-box appears after creation, so you can refine amount of points and radius value(s).
The Helix tool is very alike Circle tool in workflow, but creates a helix/spring with additional options: amount of loops and a total height.
Внимание!
Это копия пробной версии программы с официального сайта! "Ломаной" версии не существует!
- 3.0.6
- ZModeler 3
- Zmodeler3
- ZModeler
- (and 2 more)
-
ZModeler 2.0.8 build 897 in ZModeler
By DMN
ZModeler 2.0.8 build 897
ZModeler - популярный легковесный (всего пару мегабайт!) 3D редактор.
Основная сфера использования - игровое моделирование и конвертирование.
В настоящее время используется, в подавляющих случаях, для конвертирования моделей в игры серии GTA, а также с помощью подключаемых фильтров позволяет импортировать модели из большинства игр, например:
Juiced
Need For Speed
FlatOut
Race Driver
Test Drive Unlimited
и множества других
В комплекте находятся:
Crack для Zmodeler
Русификатор для ZModeler
-
ZModeler 3.0.3 b1017 in ZModeler
By DMN
Абсолютно новая версия легендарного 3D-редактора!
В третьей версии
Полностью обновлен интерфейс
Добавлено огромное количество функций
Редактирование и создании анимации
Новые средства и инструменты для моделирования
Удобная работа с иерархией модели
Возможность автоскрытия панелей инструментов
Обновленный редактор материалов
и многое-многое другое
Внимание!
Это копия пробной версии программы с официального сайта! "Ломаной" версии не существует!
-
ZModeler 2.2.6 build 992 in ZModeler
By DMN
ZModeler 2.2.6 build 992
ZModeler - популярный легковесный (всего пару мегабайт!) 3D редактор.
Основная сфера использования - игровое моделирование и конвертирование.
В настоящее время используется, в подавляющих случаях, для конвертирования моделей в игры серии GTA, а также с помощью подключаемых фильтров позволяет импортировать модели из большинства игр, например:
Juiced
Need For Speed
FlatOut
Race Driver
Test Drive Unlimited
и множества других
-
ZModeler 2.2.5 build 990 in ZModeler
By DMN
ZModeler 2.2.5 build 990
ZModeler - популярный легковесный (всего пару мегабайт!) 3D редактор.
Основная сфера использования - игровое моделирование и конвертирование.
В настоящее время используется, в подавляющих случаях, для конвертирования моделей в игры серии GTA, а также с помощью подключаемых фильтров позволяет импортировать модели из большинства игр, например:
Juiced
Need For Speed
FlatOut
Race Driver
Test Drive Unlimited
и множества других
-
ZModeler 2.2.5 build 989 in ZModeler
By DMN
ZModeler 2.2.5 build 989
ZModeler - популярный легковесный (всего пару мегабайт!) 3D редактор.
Основная сфера использования - игровое моделирование и конвертирование.
В настоящее время используется, в подавляющих случаях, для конвертирования моделей в игры серии GTA, а также с помощью подключаемых фильтров позволяет импортировать модели из большинства игр, например:
Juiced
Need For Speed
FlatOut
Race Driver
Test Drive Unlimited
и множества других
-
ZModeler 2.2.4 build 981 in ZModeler
By DMN
ZModeler 2.2.4 build 981
ZModeler - популярный легковесный (всего пару мегабайт!) 3D редактор.
Основная сфера использования - игровое моделирование и конвертирование.
В настоящее время используется, в подавляющих случаях, для конвертирования моделей в игры серии GTA, а также с помощью подключаемых фильтров позволяет импортировать модели из большинства игр, например:
Juiced
Need For Speed
FlatOut
Race Driver
Test Drive Unlimited
и множества других
0 comments
518 downloads | 4,429 Views
Submitted
-
ZModeler 2.2.2 build 964 in ZModeler
By DMN
ZModeler 2.2.2 build 964
ZModeler - популярный легковесный (всего пару мегабайт!) 3D редактор.
Основная сфера использования - игровое моделирование и конвертирование.
В настоящее время используется, в подавляющих случаях, для конвертирования моделей в игры серии GTA, а также с помощью подключаемых фильтров позволяет импортировать модели из большинства игр, например:
Juiced
Need For Speed
FlatOut
Race Driver
Test Drive Unlimited
и множества других
0 comments
229 downloads | 2,895 Views
Updated
-
New on forums
-
REQUEST CSR Racing 2 Models Requests 1 2 3 4 33
By  LamboMantisMan23, in Request & Searching of 3D Models
- 486 replies
- 38,307 views
-
REQUEST 3D Cad Browser Models Request 1 2 3 4 24
By AMG, in Request & Searching of 3D Models
- 3D Cad Browser
- 3D
- Cad
- Browser
- (and 2 more)
- 351 replies
- 32,197 views
-
REQUEST Various Configurators Models Requests 1 2 3 4 27
By  YouDude, in Request & Searching of 3D Models
- 398 replies
- 36,660 views
-
- 2,007 replies
- 197,433 views
-
-
Download Statistics